Re: Constructure URL

Author

Message

Jeff

Posted: 08/08/2002 19:30:34

Hi Sergey,

Thank you for your support. Here is the codes. Right now i can construct

the URL within the table because our application not necessary open the url

from the rve. But,

if i use the method "rve->SetItemTagEd(itemNo, tag)" it will construct the

empty link.

if i use "rve->SetCurrentTag(tag)" it will produces the same URL address

if more than one link made.Is that the memory address refer to the same place?

Any ideas?

void __fastcall TfrmDesigner::rveURLNeeded(TCustomRichView *Sender, int id,

AnsiString &url)

{

// randomize();

int itemNo;

int tNo;

AnsiString mURL;

TCustomRVFormattedData *RVData;

rve->GetJumpPointLocation(id, RVData, itemNo);

tNo = rve->GetCurrentTag();

// tNo = rve->GetItemTag(itemNo);

mURL = AnsiString ((char*) tNo);

if(IsHTTP(mURL))

url = mURL;

else

url = "http://" + mURL;

}

/----------------------------------------------------------------

void __fastcall TfrmDesigner::winMakLinkExecute(TObject *Sender)

{

AnsiString url = InputBox("URL", "URL", "URL");

if(url.AnsiCompareIC("url") == 0)

return;

if(!IsAddress(url)){

ShowMessage("Invalid URL address.");

return;

}

int itemNo = rve->CurItemNo;

TCustomRVItemInfo *RVItem;

RVItem = rve->GetCurrentItem();

rve->ApplyTextStyle(4);

int tag = (int) StrNew(url.c_str());

rve->SetItemTagEd(itemNo, tag);

}

//---------------------------------------------------------------

Thanks again...

Cheers

"Sergey Tkachenko" <svt@trichview.com> wrote:

>> By the way, the method i used current is

>> rve->GetJumpPointLocation(id, RVData, itemNo);

>Please post a complete code which you execute in OnJump.