version 1.9 saving page setup

worksmart · Post by **worksmart** » Mon May 11, 2009 1:05 pm

Hi

I am saving the rvf to a database but the page setup is lost. It there a work around to save and retore the page setup information.

Thanks Mike

Post by **Sergey Tkachenko** » Tue May 12, 2009 10:03 am

It's by design. TRichView was designed to print using the current application printing settings. These settings are saved in ScaleRichView (that was designed as a WYSIWYG text processor), not in TRichView.

Nevertheless, with some additional code, you can save and load page setup in RVF document.
In TRichView version 10.0+, there is a property DocParameters, containing subproperties for storing page size, orientation and margins.
This property is saved and loaded in RVF if rvfoSaveDocProperties and rvfoLoadDocProperties are included in RVFOptions property.
How to assign DocParameters:

Code: Select all

  procedure GetPaperWH(var Width, Height: Extended);
  var DC: HDC;
  begin
    DC := Printer.Handle;
    Width := GetDeviceCaps(DC, PHYSICALWIDTH) / GetDeviceCaps(DC, LOGPIXELSX);
    Height := GetDeviceCaps(DC, PHYSICALHEIGHT) / GetDeviceCaps(DC, LOGPIXELSY);
  end;

var
  InchPerMM: Extended;
  W,H: Extended;
begin
  ...
  rve.DocParameters.Units := rvuInches;
  InchPerMM := 1/rve.DocParameters.UnitsPerInch(rvuMillimeters);
  rve.DocParameters.LeftMargin := RVPrint1.LeftMarginMM*InchPerMM;
  rve.DocParameters.TopMargin := RVPrint1.TopMarginMM*InchPerMM;
  rve.DocParameters.RightMargin := RVPrint1.RightMarginMM*InchPerMM;
  rve.DocParameters.BottomMargin := RVPrint1.BottomMarginMM*InchPerMM;
  rve.DocParameters.HeaderY := RVPrint1.HeaderYMM*InchPerMM;
  rve.DocParameters.FooterY := RVPrint1.FooterYMM*InchPerMM;
  rve.DocParameters.MirrorMargins  := RVPrint1.MirrorMargins;
  rve.DocParameters.Orientation := Printer.Orientation;
  GetPaperWH(W,H);
  rve.DocParameters.PageWidth := W;
  rve.DocParameters.PageHeight := H;
end;

If you use RichViewActions, you may wish to store additional properties, for example properties of header and footer. See http://www.trichview.com/forums/viewtopic.php?t=10 how to access them.
You can use rve.DocProperties to store them:

Code: Select all

  rve.DocProperties.Clear;
  rve.DocProperties.Add('HeaderText='+RVA_HeaderInfo.Text);
  ...

After loading RVF, you need to activate the read page settings.
How to activate DocParameters:

Code: Select all

function ConvertPageSizeToPageFormat(PaperWidth, PaperHeight: Integer): Integer;
var tmp: Integer;
begin
  if PaperHeight<PaperWidth then begin
    tmp := PaperHeight;
    PaperHeight := PaperWidth;
    PaperWidth := tmp;
  end;
  // this is not a complete list (and mistakes are possible)
  if (PaperWidth = 297) and (PaperHeight = 420) then
    Result := DMPAPER_A3
  else if (PaperWidth = 210) and (PaperHeight = 297) then
    Result := DMPAPER_A4
  else if (PaperWidth = 148) and (PaperHeight = 210) then
    Result := DMPAPER_A5
  else if (PaperWidth = 257) and (PaperHeight = 364) then
    Result := DMPAPER_B4 // JIS
  else if (PaperWidth = 182) and (PaperHeight = 257) then
    Result := DMPAPER_B5 // JIS
  else if (PaperWidth = 216) and (PaperHeight = 279) then
    Result := DMPAPER_LETTER
  else if (PaperWidth = 216) and (PaperHeight = 356) then
    Result := DMPAPER_LEGAL
  else if (PaperWidth = 215) and (PaperHeight = 355) then
    Result := DMPAPER_LEGAL
  else if (PaperWidth = 279) and (PaperHeight = 432) then
    Result := DMPAPER_TABLOID
  else if (PaperWidth = 279) and (PaperHeight = 432) then
    Result := DMPAPER_LEDGER
  else if (PaperWidth = 140) and (PaperHeight = 216) then
    Result := DMPAPER_STATEMENT
  else if (PaperWidth = 203) and (PaperHeight = 254) then
    Result := DMPAPER_QUARTO
  else if (PaperWidth = 203) and (PaperHeight = 330) then
    Result := DMPAPER_FOLIO
  else if (PaperWidth = 184) and (PaperHeight = 267) then
    Result := DMPAPER_EXECUTIVE
  else if (PaperWidth = 99) and (PaperHeight = 225) then
    Result := DMPAPER_ENV_9
  else if (PaperWidth = 105) and (PaperHeight = 241) then
    Result := DMPAPER_ENV_10
  else if (PaperWidth = 114) and (PaperHeight = 264) then
    Result := DMPAPER_ENV_11
  else if (PaperWidth = 121) and (PaperHeight = 279) then
    Result := DMPAPER_ENV_12
  else if (PaperWidth = 127) and (PaperHeight = 292) then
    Result := DMPAPER_ENV_14
  else
    Result := 0;
end;


procedure SetPaperWH(Width, Height: Integer);
  var ADevice, ADriver, APort: array[0..79] of Char;
      ADeviceMode: THandle;
      DevMode: PDeviceMode;
begin
  Printer.GetPrinter(ADevice,ADriver,APort,ADeviceMode);
  if ADeviceMode<>0 then begin
    DevMode := PDeviceMode(GlobalLock(ADeviceMode))
    end
  else
    raise Exception.Create('Error initializing printer');
  DevMode.dmFields := DevMode.dmFields or DM_PAPERSIZE;
  DevMode.dmPaperSize := ConvertPageSizeToPageFormat(Width, Height);
  if DevMode.dmPaperSize=0 then begin
    // the results are correct even if standard PaperSize is not detected
    DevMode.dmPaperWidth := Width*10;
    DevMode.dmPaperLength := Height*10;
  end;
  GlobalUnlock(ADeviceMode);
  Printer.SetPrinter(ADevice,ADriver,APort,ADeviceMode);
end;

var MMPerUnit: Extended;
begin
  ...
  // assigning margins, HeaderYMM, FooterYMM, MirrorMargins
  RVPrint1.AssignDocParameters(rve.DocParameters);
  Printer.Orientation := rve.DocParameters.Orientation;
  MMPerUnit := rve.DocParameters.UnitsPerInch(rvuMillimeters)/
    rve.DocParameters.UnitsPerInch(rve.DocParameters.Units);
  SetPaperWH(Round(rve.DocParameters.PageWidth*MMPerUnit),
    Round(rve.DocParameters.PageHeight*MMPerUnit));
end;

worksmart · Post by **worksmart** » Tue May 12, 2009 10:34 am

Looks great but we are using version 1.9 and it is regarded as a risk up grading, I do not mind changing code we have.

Post by **Sergey Tkachenko** » Tue May 12, 2009 10:55 am

In v1.9 you can store all this information in DocProperties string list, in the form: key=value.

worksmart · Post by **worksmart** » Tue May 12, 2009 12:14 pm

Hi

How do I get the information in bold as I do not have DocParameters

Mike

procedure GetPaperWH(var Width, Height: Extended);
var DC: HDC;
begin
DC := Printer.Handle;
Width := GetDeviceCaps(DC, PHYSICALWIDTH) / GetDeviceCaps(DC, LOGPIXELSX);
Height := GetDeviceCaps(DC, PHYSICALHEIGHT) / GetDeviceCaps(DC, LOGPIXELSY);
end;

var
InchPerMM: Extended;
W,H: Extended;
begin
...
rve.DocParameters.Units := rvuInches;
InchPerMM := 1/rve.DocParameters.UnitsPerInch(rvuMillimeters);
rve.DocParameters.LeftMargin := RVPrint1.LeftMarginMM*InchPerMM;
rve.DocParameters.TopMargin := RVPrint1.TopMarginMM*InchPerMM;
rve.DocParameters.RightMargin := RVPrint1.RightMarginMM*InchPerMM;
rve.DocParameters.BottomMargin := RVPrint1.BottomMarginMM*InchPerMM;
rve.DocParameters.HeaderY := RVPrint1.HeaderYMM*InchPerMM;
rve.DocParameters.FooterY := RVPrint1.FooterYMM*InchPerMM;
rve.DocParameters.MirrorMargins := RVPrint1.MirrorMargins;
rve.DocParameters.Orientation := Printer.Orientation;
GetPaperWH(W,H);
rve.DocParameters.PageWidth := W;
rve.DocParameters.PageHeight := H;
end;

Post by **Sergey Tkachenko** » Tue May 12, 2009 4:08 pm

You can store all values in DocProperties. It's simpler to store all values in mm.

Saving

Code: Select all

rve.DocPproperties.Add('LeftMargin='+IntToStr(RVPrint1.LeftMarginMM));
...
GetPaperWH(W,H); 
rve.DocProperties.Add('PageWidth='+IntToStr(Round(W*25.4));
rve.DocProperties.Add('PageHeight='+IntToStr(Round(H*25.4));

Reading:

Code: Select all

RVPrint1.LeftMarginMM := StrToIntDef(rve.DocProperties.Values['LeftMargin'], 20);
...
SetPaperWH(
  StrToIntDef(rve.DocProperties.Values['PageWidth'], 210),
  StrToIntDef(rve.DocProperties.Values['PageHeight'], 297));

worksmart · Post by **worksmart** » Wed May 13, 2009 9:42 am

thanks very much